MetallurgicalProcessResearch

Research on segregation control for round billet of anti-sulfur steel

1(1)

1(8)

Effect of addition of nitrogen on the microstructure and properties of cold-forged-roll steels

1(19)

Analysis of roll-stamping process for rib grooves of ultra-high-strength beam parts

1(28)

Effect of heating and cooling technology on microstructure of galvannealed coating

1(34)

Adaptive-filter technology for detecting steel-strip surface roughness

2(1)

Effect of induction heating and tempering on properties and microstructures of quenched and tempered pipes

2(9)

Analysis of the factors affecting rate performance of LiFePO4lithium-ion batteries

2(16)

Research on electromagnetic properties of electromagnetic stirring roller

2(24)

Full-length model with multi-point settings for finishing rolling

《語文新課程標準》指出，語文學習要打破課內和課外、校內和校外的壁壘，充分利用課本以外的語文資源來引導學生投身語文實踐，培養其語文能力，促進其主動發展。那么對課外語文資源的開發和利用，應是指教師利用校內外的語文教學內容來源,合理構建課程資源的結構,創設語文學習環境,引導學生觀察、感悟和積累,培養和發展學生的語文素養,滿足時代發展的多樣化需求,實現課程資源價值的超水平發揮。

2(31)

Bottom dross defect and its transformation behavior during the galvannealing process

3(1)

Research on material design and high-temperature friction and wear properties of new graphitic steel

3(12)

Solute redistribution and macrosegregation in continuous casting slab of carbon steel during solidification process

4(33)

Effects of different helium cooling conditions on the structures of GH4169 alloy vacuum arc remelting ingots

4(40)

MetallurgicalProductResearch

Study of corrosion behavior of labeling medium on Fe-36%Ni cold-rolled strip used in LNG carriers in high-temperature and high-humidity environment

1(39)

Method for determining the sliding-friction coefficient of the aluminum-zinc-plated post-treatment plate

1(44)

Effect of prestrain and baking on the secondary deformation properties of cold-rolled ultra-high-strength steel sheets

2(38)

Research on life cycle assessment of film-laminated steel packaging

2(45)

Mechanical and corrosion properties of N08825 CRA clad pipeline steel

3(23)

Influence of sulfur on inclusion and pitting resistance of 316L stainless steel

3(31)

Causes of the formation of pit defects on the surface of the enamel layer

3(39)

Theoretical study on the torque values of premium connections

3(44)

Application and comparison of different anisotropic yield criteria in the formability analysis of aluminum sheet

4(1)

Microstructure and mechanical properties of low-carbon Q & P steel pretreated with intercritical annealing

4(14)

Deformation behavior of 9Cr-3W-3Co martensitic heat-resistant steel

4(24)