2020年總目次

高純錸及其化合物的制備與應用研究進展???????????????????????????????????????????????????????????張家潤，劉智勇，劉志宏，李啟厚(4): 273-279

高純仲鎢酸銨產品制備工藝現狀及發展前景???????????????????????????????????????????????????????????????????????????????????但寧寧，李江濤(5): 363-268

L12型Al3(Yb, Zr)相結構的第一性原理計算和實驗研究??????????????????????????????????????????????陳卓，方華嬋，祝昌軍，朱佳敏(1): 1-10

不同溫度下晶面衍射彈性常數的兩相模型計算??????????????????????????????????????????????????????????許海峰，祝昌軍，陳康華，劉力(2): 91-97

Ti2AlNb基合金高溫氧化初期熱力學分析??????????????????????????????????????????????????????????????????楊家俊，劉立斌，趙云，章立鋼(2): 98-103

Ti-Al-Nb三元體系50Ti-Al-Nb的垂直截面????????????????????????????????????????????????????????????趙云，劉立斌，楊家俊，章立鋼(4): 280-287

極端應變率下鎢孔洞演化及其力學響應的分子動力學模擬?????????????????百曉丹，陳遜，馬運柱，劉文勝，梁超平(4): 288-295

Ti(C0.7N0.3)對(Ti,W,Ta)C-Mo-Ni系金屬陶瓷組織與性能的影響?????????????????????????????????????????????藺紹江，陳肖，熊惟皓(1): 11-15

低溫軋制及時效熱處理對Al-Zn-Mg鋁合金顯微組織與性能的影響?????????????????????陳送義，劉強，陳康華，黃蘭萍(1): 16-26

固溶時效處理對SLM成形CoCrWMo合金組織與性能的影響?????????????????班樂，黃嘉豪，毛衛東，吳苑標，肖志瑜(1): 27-34

TiN添加量對WC-TiC-TaC-8.0Co硬質合金組織與性能的影響????????????????????????????????????????????王雁潔，劉詠，楊新宇(1): 35-39

煅燒溫度對共沉淀法制備熱障涂層用LaMgAl11O19前驅粉末性能的影響??????????????????????????????????????劉冬梅，李超(1): 40-44

Ti含量對Ti-MoSi2復合材料組織與性能的影響??????????????????????????????????????????????????????????郝亞楠，范景蓮，陸瓊，王圓圓(1): 45-50

粉磨方式對鋼渣微粉特性的影響??????????????????????????????????????????????????????????????????????段思宇，李溪，馬卓慧，廖洪強，程芳琴(1): 51-57

原料中C/N原子比對TiCN基金屬陶瓷組織結構和性能的影響??????????????????????????????????????崔焱茗，張立，黃龍，劉濤，梁艷，吳厚平，熊湘君(1): 58-64

激光熔覆Fe-Mo-V-C合金涂層組織及摩擦磨損性能????????????????????????????????張磊，陳小明，蘇建灝，張凱，諶寬，趙堅(1): 65-71

SPS制備ODS鐵基合金的顯微組織與力學性能????????????????????????????段清龍，劉祖銘，黃立清，郭旸，蘇鵬飛，陳仕奇(1): 72-78

保溫時間對黃土基陶瓷膜支撐體性能的影響????????????????????????????????????????????????李大川，同幟，黃開佩，王佳悅，周廣瑞(1): 79-85

基于黏結理論的球磨機梯形襯板的設計?????????????????????????????????????????????????????????????????????????????????????????褚亮，董為民，龔夢(1): 86-90

流延制備有序排列石墨烯增韌氧化鋯陶瓷的結構與力學性能???????????????????????????????蔡偉金，李青，劉耀，劉紹軍(2): 104-111

S275鐵素體鋼板窄間隙激光焊的缺陷形成機理及影響因素?????????????????????????????????????????????????????????????????????????章鴻(2): 112-117

HfB2-ZrB2-SiC改性C/C復合材料的制備及性能?????????????????????????????????????????????????????向秋玲，湯振霄，彭可，易茂中(2): 118-124

2055鋁鋰合金熱拉伸的顯微組織與流變應力行為??????????????????????????????????????????????????????????????劉寧，肖代紅，劉文勝(2): 125-132

基于定向多孔SiC的浸漬?裂解法制備SiC陶瓷材料的結構與性能????????????????????????????????????????????????????????黃玉娟，熊慧文，鄒金住，周科朝，張斗(2): 133-139

粉體表面改性對氧化鋯光固化成形的影響?????????????????????????????????????????????????????????李青，劉耀，蔡偉金，石原，劉紹軍(2): 140-147

化學鍍鎳(SCF-Ni)短炭纖維增強鋁基復合材料的顯微組織與力學性能?????????????????????????????????????蔣文婷，李國棟，楊娟，劉陽，于士杰(2): 148-156

ZrB2含量和燒結溫度對ZrC-ZrB2復合材料組織與性能的影響??????????????????王圓圓，范景蓮，陸瓊，郝亞楠，高銀(2): 157-163

高溫刻蝕硼摻雜金剛石電極材料的形貌與電化學性能??????????????????????????????????????????劉婷，苗冬田，魏秋平，馬莉(2): 164-170

新型漿料注射法制備C/C復合材料的顯微組織及力學性能??????????????????????????胡姣，李國棟，張洋，韓前武，姜毅(2): 171-178

碳納米管對泡沫銅/石蠟復合相變材料熱性能的影響????????????????包勝友，安俊杰，馬莉，魏秋平，柏振海，周科朝(2): 179-184

高溫高壓柔性介質成形GH4169異形超細曲面的致密化行為???????????????????馬丁，郎利輝，肖毅，孟凡迪，李世越(3): 185-190

無壓燒結氮化硅陶瓷的致密化過程???????????????????????????????????????????????????????????????????????劉文勇，李建斌，孫振飛，蔣強國(3): 191-196

(TiH2+TiB2)/AA7075復合粉末激光選區熔化成形的顯微組織與力學性能???????????????????????????????????????????????????????????歐陽盛，劉允中，沈君劍，肖小軍(3): 197-205

鋯合金包殼管內壁SiC涂層的PECVD制備與性能??????????????????????????????????????????????????????????????????????????譚瑞軒，王洪磊，余金山，李懷林，劉艷紅，樊哲瓊，盧蕾文，周新貴(3): 206-212

微波熱壓優化分層微觀結構BiSb2?xTe3合金的熱電性能?????????劉培海，馮波，胡曉明，李如松，張陽琳，樊希安(3): 213-220

B位Hf摻雜對0.94Bi0.5Na0.5TiO3-0.06BaTiO3陶瓷結構與性能的影響??????????????????????????????????????????????彭聰斐，黃榮廈，黎家就，熊順進，林華泰(3): 221-226

高氧鈮粉的鎂還原降氧工藝???????????????????????????????????????????????????????????????????????????劉芳，李慶奎，羅俊鋒，徐國進，張巧霞(3): 227-233

超音速噴涂WC-10Co4Cr及WC-12Co涂層的抗海水氣蝕性能???????????伏利，劉偉，陳小明，趙堅，李育洛，張磊(3): 234-238

氧化鉺對3D打印氧化鋯陶瓷飾品性能的影響?????????????????????????????王勝亮，李練，王明浪，何福坡，李艷輝，伍尚華(3): 239-244

熔鹽電解高純鈦的結晶機理及形貌????????????????????????????????????????????????????馮嘯，姜嫄嫄，馬鑫，翁啟鋼，袁鐵錘，周志輝(3): 245-250

激光選區熔化成形TiB2與SiC顆粒混雜增強鋁基復合材料的顯微組織與力學性能???????????????????????????????????????????????沈君劍，劉允中，歐陽盛，洪旭潮，劉小輝(3): 251-259

Ni10Mo/CF復合材料的制備及析氫性能研究????????????????????????????????????蒲佳璇，曹軍，魏秋平，尹登峰，馬莉，周科朝(3): 260-266

激光熔覆FeCr和CoCr合金涂層的組織與性能???????????????????????????????????????劉偉，伏利，陳小明，張磊，李育洛，張凱(3): 267-272

球磨時間對M2粉末冶金高速鋼組織與力學性能的影響?????????????????????????????????????????楊軍浩，劉如鐵，熊翔，欒懷壯，郝彥榮，楊寶震，陳潔(4): 296-303

氮?dú)鉄Y(jié)金屬注射成形17-4PH不銹鋼的組織與性能?????????????????????????????????????????????????????????王越，李瑞迪，袁鐵錘(4): 304-311

Cr含量對NiCrMoCu多孔材料高溫氧化行為的影響???????????????????????????????鄒浩然，李喜德，張綽，楊軍勝，賀躍輝(4): 312-320

納米SiC對Ti(C,N)基金屬陶瓷微觀組織與性能的影響??????????????????????????龔滌凡，李詠俠，楊海林，鄒丹，劉艷軍(4): 321-329

LaB6對Ti(C,N)基金屬陶瓷致密化及組織與性能的影響????????????????????????????????????????????????????????????????????????????????????黃建華，張鹛媚，康希越，吝楠，顏焰，邱嵩，劉毅，賀躍輝(4): 330-337

鎂鋁尖晶石對95氧化鋁陶瓷顯微結構與力學性能的影響????????????????????????????????????????????????????????????????????????方豪杰，劉秋宇，賀亦文，郭偉明，張曉云，朱林林，曾超，林華泰(4): 338-343

放電等離子燒結Ti-1Al-8V-5Fe合金的致密化機理??????????????????????????李文杰，曾凡浩，李磊，王紫微，劉紅浩，彭奕瑞，古一(4): 344-351

TNZS基生物材料的體外組織相容性???????????????????????????????????????????????????????????????????????趙倩(4): 352-357

噴射成形制備建筑用硅質巖/A356復合材料的組織與力學性能?????????????????????????????????李奎，張照方，馬楠，李明(4): 358-362

速度對AuNi9/AuAg35Cu5載流摩擦磨損行為的影響????????????????????????????????????????????????????????周雄，羅博，康瀟，張雷(5): 369-374

納米鎢輔助氫氣還原氧化鎢制備超細鎢粉???????????????????????????????????????????????????????????????????????????????????????????張勇，張國華(5): 375-380

碳含量對WC-TiC-Co合金組織與性能的影響?????????????????????????????????????????????????????????羅任，熊慧文，陳楠，李志友(5): 381-388

還原鎢粉粒度特性的過程研究????????????????????????????????????????????????????????????????????????陳杉杉(5): 389-395

黏結劑對鐵基混合粉末性能的影響??????????????????????????????????????????????????????????????????????????????????????????蘇鳳戈，鄭卓，陳陸水(5): 396-402

B含量對CrFeCoNiTi0.6高熵合金顯微組織和性能的影響?????????????????????????????????????姜越，李秀明，周廣泰，朱柏祥(5): 403-409

啟閉機活塞桿表面爆炸噴涂制備Al2O3涂層的顯微組織與性能????????????????????????????????????????????????????????????????伏利，陳小明，毛鵬展，劉偉，張磊，張凱，李育洛(5): 410-416

預混液成分對光固化成形氮化硅陶瓷力學性能的影響???????????????????????????????????????????????????????????????????????????????????劉耀，何宇，辛峰，王斌，占麗娜，文如泉，肖文福，劉紹軍(5): 417-423

粉末冶金立方氮化硼聚晶材料的球磨混料工藝?????????????????????????????????????????????????謝輝，鄧福銘，王浩，韓順利，馮飛(5): 424-432

AlCl3·6H2O中Mg雜質的去除工藝?????????????????????????????鈔曉光，高桂梅，王宏賓，曹坤，戴崟，松麗濤，鄒萍，王永旺(5): 433-439

礦用卡車離合器用鋅鎢合金增強銅基粉末冶金摩擦材料的摩擦磨損性能???????????????????????????????????????????????????????????????謝茂青，王雷剛，彭鵬，楊國盛，張嘉浩(5): 440-448

電極感應氣霧化法制備Y2O3增強Ti-6Al-4V復合粉末的性能?????????????????????????????????????????????????????劉聯平，陳仕奇(6): 449-457

SiC含量對內燃機用Ti-6Al-4V合金復合膜組織和摩擦性能的影響?????????????????????????????????????????????王雪，于秀濤(6): 458-464

Inconel 718合金粉末粒形定量表征及其SLM成形工藝優化?????????????????????????????????????????????????許陽，張榮，肖志瑜(6): 465-474

油氣管道37Mn5鋼表面激光熔覆CoCrW涂層的組織及腐蝕性能?????????????????王榮健，梁金祿，黃小玉，石海信(6): 475-479

爆炸噴涂鐵基非晶涂層的微觀結構和納米壓痕行為?????????????????????????????????????????????歐陽晟，儲志強，唐求豪，解路(6): 480-485

放電等離子燒結無黏結相Ti(C,N)基金屬陶瓷的組織與性能???????????????????????????盧賽君，康希越，張鹛媚，賀躍輝(6): 486-496

電子束選區熔化制備純鉬塊體的組織與性能?????????????????????????????李會霞，朱紀磊，譚彥妮，劉彬，陳睿，趙培，弋陽(6): 497-504

SPS工藝參數對ZrB2-MoSi2-SiC復合陶瓷組織與高溫抗氧化性能的影響????????????????????????????????????????????????????????????????????張玉棟，李繼文，王南南，潘昆明，張亮亮(6): 505-512

球磨時間對NbMoTaWVCr難熔高熵合金組織與性能的影響????????????????????彭海燕，康志新，李小珍，周莉，龍雁(6): 513-519

六鈦酸鉀晶須增強汽車干式離合器摩擦片的熱衰退和振顫特性???????????????????????????????????????????????謝茂青，王雷剛(6): 520-526

噴嘴入口傾斜角對干法造粒制備Si3N4顆粒霧化過程的影響???????????????????????????????????????????????????廖達海，方永振，周賤根，甘振華，方長福，吳南星(6): 527-537

銅基粉末冶金剎車材料支撐背板表面鍍層對防滲碳性能的影響???????????????????????????????????????????????????????曹文明，姚萍屏，周海濱，趙林，許良，肖葉龍(6): 538-544

Research progress on preparation and application of high-purity rhenium and its compounds???????????????????????????????????????????????????????????????????????????????????????ZHANG Jiarun, LIU Zhiyong, LIU Zhihong, LI Qihou(4): 273-279

Preparation technology status and development prospect of high purity ammonium paratungstate product???????????????????????????????????????????????????????????????????????DAN Ningning, LI Jiangtao(5): 363-368

First-principles calculations study and experimental results of L12-structured Al3(Yb,Zr) precipitate????????????????????????????????????????????????????????????????????????????????????????????????????????????CHEN Zhuo, FANG Huachan, ZHU Changjun, ZHU Jiamin(1): 1-10

Two-phase model calculation of diffraction elastic constant of crystal plane at different temperature?????????????????????????????????????????????????????????????????????????????????XU Haifeng, ZHU Changjun, CHEN Kanghua, LIU Li(2): 91-97

Thermodynamic analysis of Ti2AlNb-based alloy in the initial stage of high temperature oxidation?????????????????????????????????????????????????????????????????????YANG Jiajun, LIU Libin, ZHAO Yun, ZHANG Ligang(2): 98-103

Vertical section of 50Ti-Al-Nb in Ti-Al-Nb system?????????????????????????ZHAO Yun, LIU Libin, YANG Jiajun, ZHANG Ligang(4): 280-287

Molecular dynamics simulation of void evolution and its mechanical response in single-crystal tungsten under extreme strain rate???????????????????????????????????????????????????BAI Xiaodan, CHEN Xun, MA Yunzhu, LIU Wensheng, LIANG Chaoping(4): 288-295

Effects of Ti(C0.7N0.3) addition on the microstructure and properties of (Ti,W,Ta)C-Mo-Ni cermets??????????????????????????????????????????????????????????????????????????????????????????????????????????????????LIN Shaojiang, CHEN Xiao, XIONG Weihao(1): 11-15

Effect of cryogenic rolling and aging heat treatment on microstructure and properties of Al-Zn-Mg aluminum alloy??????????????????????????????????????????????????????????????????????????????????????????????????????CHEN Songyi, LIU Qiang, CHEN Kanghua, HUANG Lanping(1): 16-26

Effect of solution-aging treatment on the microstructure and properties of selective laser melted CoCrWMo alloys??????????????????????????????????????????????????????????????????????????????????????????BAN Le, HUANG Jiahao, MAO Weidong, WU Yuanbiao, XIAO Zhiyu(1): 27-34

Effect of TiN content on microstructure and properties of WC-TiC-TaC-8%Co cemented carbide??????????????????????????????????????????????????????????????????????????????????????WANG Yanjie, LIU Yong, YANG Xinyu(1): 35-39

Effect of temperature of coprecipitation on properties of LMA precursors for thermal barrier coatings??????????????????????????????????????????????????????????????????????????????????????????????????????????LIU Dongmei, LI Chao(1): 40-44

Effect of Ti content on microstructure and properties of Ti-MoSi2composite material???????????????????????????????????????????????????????????????????????????????????????????????????????????HAO Yanan, FAN Jinglian, LU Qiong, WANG Yuanyuan(1): 45-50

Effect of grinding method on properties of steel slag powder??????????????????????????????????????????????????????????????????????????????????????????DUAN Siyu, LI Xi, MA Zhuohui, LIAO Hongqiang, CHENG Fangqin(1): 51-57

Effects of C/N atomic ratio in raw materials on the microstructure and properties of Ti(C,N)-based cermets???????????????????????????????????????????????????????CUI Yanming, ZHANG Li, HUANG Long, LIU Tao, LIANG Yan, WU Houping, XIONG Xiangjun(1): 58-64

Microstructure and frictional wear performance of Fe-Mo-V-C alloy coating prepared by laser cladding?????????????????????????????????????????????????????????????????????????????ZHANG Lei, CHEN Xiaoming, SU Jianhao, ZHANG Kai, CHEN Kuan, ZHAO Jian(1): 65-71

Microstructure and mechanical properties of oxide dispersion strengthened Fe-based alloy prepared by spark plasma sintering????????????????????????????DUAN Qinglong, LIU Zuming, HUANG Liqing, GUO Yang, SU Pengfei, CHEN Shiqi(1): 72-78

Effect of holding time on properties of loess-based inorganic ceramic membrane supports???????????????????????????????????????????????????????????????????????????????????????LI Dachuan, TONG Zhi, HUANG Kaipei, WANG Jiayue, ZHOU Guangrui(1): 79-85

Design of trapezoidal liner of ball mill based on bonding theory???????????????????????????CHU Liang, DONG Weimin, GONG Meng(1): 86-90

Structure and mechanical properties of ordered graphene toughened zirconia ceramics prepared by tape casting????????????????????????????????????????????????????????????????????????????????CAI Weijin, LI Qing, LIU Yao, LIU Shaojun(2):104-111

Defect formation mechanism and influence factors of narrow gap multi-pass fiber laser welding of S275 ferritic

steel sheets????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????ZHANG Hong(2): 112-117

Preparation and properties of HfB2-ZrB2-SiC modified C/C composites?????????????????????????????????????????????????????????????????????????????????????????????????????????????XIANG Qiuling, TANG Zhenxiao, PENG Ke, YI Maozhong(2): 118-124

Microstructure and flow stress behavior of 2055 Al-Li alloy under hot tension???????????????????????????????????????????????????????????????????????????????????????????LIU Ning, XIAO Daihong, LIU Wensheng(2): 125-132

Structure and properties of SiC ceramics prepared by dip cracking method based on oriented porous SiC??????????????????????????????????????????????????????????????????????????????HUANG Yujuan, XIONG Huiwen, ZOU Jinzhu, ZHOU Kechao, ZHANG Dou(2): 133-139

Effect of powder surface modification on the stereolithography of zirconia?????????????????????????????????????????????????????????????????????????????????????????????????????????????????LI Qing, LIU Yao, CAI Weijin, SHI Yuan, LIU Shaojun(2): 140-147

Microstructure and mechanical property of aluminum matrix composite strengthened by short carbon fiber with Ni-coating (SCF-Ni) ??????????????????????????????????????????????????????????????JIANG Wenting, LI Guodong, YANG Juan, LIU Yang, YU Shijie(2): 148-156

Effect of ZrB2content and sintering temperature on the microstructure and properties of ZrC-ZrB2composites??????????????????????????????????????????????????????????????????????????????????????????????????WANG Yuanyuan, FAN Jinglian, LU Qiong, HAO Ya’nan, GAO Yin(2): 157-163

Morphology and electrochemical performance of high temperature etching boron doped diamond electrode materials???????????????????????????????????????????????????????????????????????????????????????????????????????????????LIU Ting, MIAO Dongtian, WEI Qiuping, MA Li(2): 164-170

Microstructure and mechanical properties of C/C composites prepared by a novel slurry injection technique?????????????????????????????????????????????????????????????????????????????????????????????????????HU Jiao, LI Guodong, ZHANG Yang, HAN Qianwu, JIANG Yi(2): 171-178

Effect of carbon nanotube on thermal properties of copper foam/paraffin composite phase change materials????????????????????????????????????????????????????????????????????????????????????BAO Shengyou, AN Junjie, MA Li, WEI Qiuping, BO Zhenhai, ZHOU Kechao(2): 179-184

Densification behavior of GH4169 ultra-fine curved surface irregular structures formed by high temperature and high pressure flexible media????????????????????????????????????????????????????????MA Ding, LANG Lihui, XIAO Yi, MENG Fandi, LI Shiyue(3): 185-190

Densification process of pressureless sintered silicon nitride ceramics??????????????????????????????????????????????????????????????????????????????????????????????????????????????????LIU Wenyong, LI Jianbin, SUN Zhenfei, JIANG Qiangguo(3): 191-196

Microstructure and mechanical properties of selective laser melting of (TiH2+TiB2)/AA7075 composite powders???????????????????????????????????????????????????????????????????????????????????????????????????????????OUYANG Sheng, LIU Yunzhong, SHEN Junjian, XIAO Xiaojun(3): 197-205

Preparation and properties of SiC coating on inner surface of Zr-cladding by PECVD??????????????????????????TAN Ruixuan, WANG Honglei, YU Jinshan, LI Huailin, LIU Yanhong, FAN Zheqiong, LU Leiwen, ZHOU Xingui(3): 206-212

Thermoelectric properties of BiSb2?xTe3alloy with layered microstructure optimized by microwave hot pressing????????????????????????????????????????????????????????????????????????????????LIU Peihai, FENG Bo, HU Xiaoming, LI Rusong, ZHANG Yanglin, FAN Xi’an(3): 213-220

Effect of B-site Hf doping on the structure and properties of 0.94Bi0.5Na0.5TiO3-0.06BaTiO3ceramics????????????????????????????????????????????????????????????????????????????????????????PENG Congfei, HUANG Rongxia, LI Jiajiu, XIONG Shunjin, LIN Huatai(3): 221-226

Deoxygenation process of high oxygen niobium powders by magnesium reduction??????????????????????????????????????????????????????????????????????????????????????????????????????LIU Fang, LI Qingkui, LUO Junfeng, XU Guojin ZHANG Qiaoxia(3): 227-233

Seawater cavitation resistance of supersonic sprayed nano-WC-10Co4Cr and WC-12Co coatings???????????????????????????????????????????????????????????????????????????????????????????????FU Li, LIU Wei, CHEN Xiaoming, ZHAO Jian, LI Yuluo, ZHANG Lei(3): 234-238

Effect of Er2O3on properties of 3D printed zirconia ceramic jewelry?????????????????????????????????????????????????????????????????????????WANG Shengliang, LI Lian, WANG Minglang, HE Fupo, LI Yanhui, WU Shanghua(3): 239-244

Crystallization mechanism and morphology of high purity titanium prepared by molten salt electrolysis???????????????????????????????????????????????????????????????????FENG Xiao, JIANG Yuanyuan, MA Xin, WENG Qigang, YUAN Tiechui, ZHOU Zhihui(3): 245-250

Microstructures and mechanical properties of aluminum matrix composites reinforced with hybrid TiB2and SiC prepared by selective laser melting????????????????????????????????????????????????????????????????????????????????SHEN Junjian, LIU Yunzhong, OUYANG Sheng, HONG Xuchao, LIU Xiaohui(3): 251-259

Preparation of Ni10Mo/CF composite as an electrocatalyst for hydrogen evolution reaction in alkali solution???????????????????????????????????????????????????????????????????????????????????PU Jiaxuan, CAO Jun, WEI Qiuping, YIN Dengfeng, MA Li, ZHOU Kechao(3): 260-266

Microstructure and properties of FeCr and CoCr laser cladding coatings?????????????????????????????????????????????????????????????????????????????????????????????LIU Wei, FU Li, CHEN Xiaoming, ZHANG Lei, LI Yuluo, ZHANG Kai(3): 267-272

Effect of milling time on the microstructure and mechanical properties of M2 powder metallurgy high speed steel????????????????????????????????????????YANG Junhao, LIU Rutie, XIONG Xiang, LUAN Huaizhuang, HAO Yanrong, YANG Baozhen, CHEN Jie(4): 296-303

Microstructure and properties of MIM 17-4PH stainless steel prepared by nitrogen sintering process????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????WANG Yue, LI Ruidi, YUAN Tiechui(4): 304-311

Effect of Cr content on high temperature oxidation behavior of porous NiCrMoCu alloys???????????????????????????????????????????????????????????????????????????????????????????????????ZOU Haoran, LI Xide, ZHANG Chuo, YANG Junsheng, HE Yuehui(4): 312-320

Nano-SiC addition on microstructure, mechanical properties and high temperature oxidation resistance of Ti(C,N)-based cermets???????????????????????????????????????????????????????????GONG Difan, LI Yongxia, YANG Hailin, ZOU Dan, LIU Yanjun(4): 321-329

Effects of LaB6addition on densification behavior, microstructure and mechanical properties of Ti(C,N) based cermets?????????????????????????????HUANG Jianhua, ZHANG Meimei, KANG Xiyue, LIN Nan, YAN Yan, QIU Song, LIU Yi, HE Yuehui(4): 330-337

Effect of magnesium aluminate spinel on the microstructures and mechanical properties of 95 alumina ceramics?????????????????????????????FANG Haojie, LIU Qiuyu, HE Yiwen, GUO Weiming, ZHANG Xiaoyun, ZHU Linlin, ZENG Chao, LIN Huatai(4): 338-343

Densification mechanism of Ti-1Al-8V-5Fe alloy by spark plasma sintering?????????????????????????????????????????????????????????????????????????LI Wenjie, ZENG Fanhao, LI Lei, WANG Ziwei, LIU Honghao, PENG Yirui, GU Yi(4): 344-351

In vitro histocompatibility of TNZS-based biomaterials?????????????????????????????????????????????????????????????????????????????????????????ZHAO Qian(4): 352-357

Microstructure and mechanical properties of siliceous rock/A356 composites for construction prepared by spray forming????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????LI Kui, ZHANG Zhaofang, MA Nan, LI Ming(4): 358-362

Effect of the speed on current-carrying friction and wear behavior of AuNi9 on AuAg35Cu5 disc?????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????ZHOU Xiong, LUO Bo, KANG Xiao, ZHANG Lei(5): 369-374

Preparation of ultrafine tungsten powder by nano-tungsten assisting hydrogen reduction of tungsten oxide????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????ZHANG Yong, ZHANG Guohua(5): 375-380

Effects of carbon content on the microstructure and performance of WC-TiC-Co cemented carbides???????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????LUO Ren, XIONG Huiwen, CHEN Nan, LI Zhiyou(5): 381-388

Process research on particle size characteristics of reduced tungsten powder?????????????????????????????????????????CHEN Shanshan(5): 389-395

Effect of binder on properties of iron based mixed powder????????????????????????????????????SU Fengge, ZHENG Zhuo, CHEN Lushui(5): 396-402

Effects of B content on microstructure and properties of CrFeCoNiTi0.6high-entropy alloy????????????????????????????????????????????????????????????????????????????????????????????????????????????????????JIANG Yue, LI Xiuming, ZHOU Guangtai, ZHU Baixiang(5): 403-409

Microstructure and properties of Al2O3coating on the surface of hoist piston rod prepared by explosive spraying????????????????????????????????????????????????????????????FU Li, CHEN Xiaoming, MAO Pengzhan, LIU Wei, ZHANG Lei, ZHANG Kai, LI Yuluo(5): 410-416

Effect of premix ratio on mechanical properties of silicon nitride ceramics prepared by stereolithography??????????????????????????????????????????????????LIU Yao, HE Yu, XIN Feng, WANG Bin, ZHAN Lina, WEN Ruquan, XIAO Wenfu, LIU Shaojun(5): 417-423

Ball milling mixing progress for preparation of polycrystalline cubic boron nitride composites??????????????????????????????????????????????????????????????????????????????????????????????????????XIE Hui, DENG Fuming, WANG Hao, HAN Shunli, FENG Fei(5): 424-432

Removal process of Mg impurity in AlCl3·6H2O????????????????????CHAO Xiaoguang, GAO Guimei, WANG Hongbin, CAO Kun, DAI Yin, SONG Litao, ZOU Ping, WANG Yongwang(5): 433-439

Friction and wear properties of PM Zn-W alloy reinforcing copper-based friction material for mining truck clutches??????????????????????????????????????????????????????????????????XIE Maoqing, WANG Leigang, PENG Peng, YANG Guosheng, ZHANG Jiahao(5): 440-448

Characterization of Y2O3reinforced Ti-6Al-4V composite powder prepared by electrode induced gas atomization?????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????LIU Lianping, CHEN Shiqi(6): 449-457

Effects of SiC content on the composite membrane structure and friction properties of Ti-6Al-4V alloy for internal combustion engine?????????????????????????????????????????????????????????????????????????????????????????????????????????????????????WANG Xue, YU Xiutao(6): 458-464

Quantitative characterization of Inconel 718 alloy powder particle shape and optimization of its SLM forming process????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????XU Yang, ZHANG Rong, XIAO Zhiyu(6): 465-474

Microstructure and corrosion properties of laser cladding CoCrW coating on 37Mn5 steel surface of oil and gas pipeline??????????????????????????????????????????????????????????????????????????????????????????????WANG Rongjian, LIANG Jinlu, HUANG Xiaoyu, SHI Haixin(6): 475-479

Microstructure and nano-indentation behavior of detonation sprayed iron-based amorphous coating?????????????????????????????????????????????????????????????????????????????????????????????????????????????????????OUYANG Sheng, CHU Zhiqiang, TANG Qiuhao, XIE Lu(6): 480-485

Microstructure and properties of bindeless Ti(C,N)-based cermets prepared by spark plasma sintering????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????LU Saijun, KANG Xiyue, ZHANG Meimei, HE Yuehui(6): 486-496

Microstructure and properties of pure molybdenum block prepared by selective electron beam melting???????????????????????????????????????????????????????????????????????????????????LI Huixia, ZHU Jilei, TAN Yannni, LIU Bin, CHEN Rui, ZHAO Pei, YI Yang(6): 497-504

Effects of SPS process parameters on microstructure and high-temperature oxidation resistance of ZrB2-MoSi2-SiC composite ceramics???????????????????????????????????????????ZHANG Yudong, LI Jiwen, WANG Nannan, PAN Kunming, ZHANG Liangliang(6): 505-512

Effects of ball milling time on microstructure and properties of NbMoTaWVCr refractory high entropy alloy??????????????????????????????????????????????????????????????????????????????????????????????????PENG Haiyan, KANG Zhixin, LI Xiaozhen, ZHOU Li, LONG Yan(6): 513-519

Thermal degradation and judder characteristics of the friction facing for automobile dry clutch enhanced by potassium hexatitanate whisker?????????????????????????????????????????????????????????????????????????????????????????????????XIE Maoqing, WANG Leigang(6): 520-526

Effect of nozzle inlet angle on the atomization process of Si3N4particles prepared by dry granulation??????????????????????????????????????????????????????????LIAO Dahai, FANG Yongzhen, ZHOU Jiangen, GAN Zhenhua, FANG Changfu, WU Nanxing(6): 527-537

Effect of coating on steel back of Cu-based powder metallurgy brake materials on carburizing resistance ??????????????????????????????????????????????????????????????????????????CAO Wenming, YAO Pingping, ZHOU Haibin, ZHAO Lin, XU Liang, XIAO Yelong(6): 538-544