Muhammad Naeem Akbar ,Seemab Khan ,Muhammad Umar Farooq ,Majed Alhaisoni ,Usman Tariq and Muhammad Usman Akram

1Department of Computer Engineering,National University of Sciences and Technology(NUST),Islamabad,46000,Pakistan

2Department of Robotics,SMME NUST,Islamabad,45600,Pakistan

3Computer Sciences Department,College of Computer and Information Sciences,Princess Nourah Bint Abdulrahman University,Riyadh,11671,Saudi Arabia

4Management Information System Department,College of Business Administration,Prince Sattam bin Abdulaziz University,Al-Kharj,16278,Saudi Arabia

ABSTRACT The combination of spatiotemporal videos and essential features can improve the performance of human action recognition(HAR);however,the individual type of features usually degrades the performance due to similar actions and complex backgrounds.The deep convolutional neural network has improved performance in recent years for several computer vision applications due to its spatial information.This article proposes a new framework called for video surveillance human action recognition dubbed HybridHR-Net.On a few selected datasets,deep transfer learning is used to pre-trained the EfficientNet-b0 deep learning model.Bayesian optimization is employed for the tuning of hyperparameters of the fine-tuned deep model.Instead of fully connected layer features,we considered the average pooling layer features and performed two feature selection techniques-an improved artificial bee colony and an entropy-based approach.Using a serial nature technique,the features that were selected are combined into a single vector,and then the results are categorized by machine learning classifiers.Five publically accessible datasets have been utilized for the experimental approach and obtained notable accuracy of 97%,98.7%,100%,99.7%,and 96.8%,respectively.Additionally,a comparison of the proposed framework with contemporary methods is done to demonstrate the increase in accuracy.

KEYWORDS Action recognition;entropy;deep learning;transfer learning;artificial bee colony;feature fusion

1 Introduction

Over the last decade,machine learning(ML)has emerged as one of the most rapidly growing fields in advanced computer sciences.Several studies in Activity Recognition have been conducted using machine learning and computer vision[1].However,they encountered various types and similarities between multiple human actions,making it more difficult to identify the action accurately.Several techniques for action recognition have been introduced in the past.These techniques belong to traditional ML methods such as Convolution Neural Networks (CNN) and sparse coding (SC).Few advanced ML techniques,including Long-term Short Memory (LTSM),Deep Convolutional Neural Networks(DCNN),and recurrent neural networks(RNN),have also been employed for action recognition with improved accuracy[2].

These advanced techniques are comprised of complex architectures that require a lot of memory and have limitations regarding computational resources for HAR applications.Real-world applications of HAR may include Human-Computer Interaction(HCI)and some intelligent video surveillance applications.Mobile Edge Computing(MEC)also contributes a lot of technology integration in the field of medicine.Automation in remote health care supervision is also one of the advantages of MEC.The technique is also applicable in action recognition.The services where HAR might be applicable may include content-centric summarization [3],sports video analysis and evaluation,and remote health monitoring applications for intelligent surveillance.Silhouette-based features can support robust detection of actions in a real-time environment [4].Action recognition from video streams has advanced from analyzing the present to forecasting the coming action.It applies highly to surveillance,driverless cars,and entertainment[5].

EfficientNet Models [6] are state-of-the-art deep CNN (DCNN) models comprising meek yet highly potent compound scaling functions.The function can scale a baseline CNN to a target resource bound while maintaining model efficiency.EfficientNet is a scale-able model in terms of layer depth,width,and resolution,which makes it capable of performing better than other DCNNs,which include AlexNet,GoogleNet,and MobileNet.It has become an important and basic component of new computer vision research,especially in deep learning.In the proposed technique,EfficientNet [7] is used to extract the best features from multiple datasets,and these feature vectors are further processed.Transfer learning involves transferring information from the source domain(ImageNet)to the target domain[8].Information is transferred to get the best features from the datasets.Fully connected layers are modified to account for the no number of classes in each dataset.The technique helps to create a high-performance method that uses pre-trained models[9].

Major Challenges and Contributions:Intangible ML and Data Mining(DM)techniques have been applied to solve numerous real applications.Feature fusion is a technique where extracted feature vectors from the training images are fused based on some pre-determined standard [10].The fused vector has the best features with a high contribution.In supervised learning,the dataset is kept in two sets,training,and testing,depending upon the ratio set by the researcher.Training images are used to make the model learn,and then the proposed model is validated on testing images.Evaluation is done on pre-defined parameters [11].The current deep learning systems mainly focus on hybridizing the latest and traditional deep learning methods.Most of the hybrid techniques managed to improve the accuracy,but their least focus was on reducing the time complexity.Computational time is a significant component,especially in action recognition problems,as the system needs to identify the correct action in a minimum time[12].Some other factors that need to be sorted for better results include redundant and irrelevant or unimportant features.

In this work,we proposed a deep learning and Entropy controlled optimization algorithm-based framework for action recognition.The following are our main contributions:

? Fine-tuned EfficientNet-B0 deep learning model and training are performed on selected action recognition datasets using deep transfer learning.The deep model’s training has been done with static hyperparameters.

? Entropy-controlled Artificial Bee Colony optimization algorithm is proposed for the best feature selection.

? Fusion is performed using a mean deviation-based serial threshold function.

2 Literature Review

Recently,HAR has grown in importance as a research field.The researchers have adapted several supervised and unsupervised learning methods for HAR applications[13].It is essential to consider all available clues to analyze human behavior and predict the appropriate action later.Human action can also be identified using the blend of some traditional techniques with advanced deep learning methods.Traditional methods for action recognition may not produce the best result when used in isolation—a hybrid of conventional and advanced techniques performed better in several recent studies.

Masmoudi et al.[2]presented an unsupervised CNN that has overcome memory and computational issues to a greater extent.PCANet-TOP is an unsupervised convolutional PCANet architecture;it can learn spatiotemporal features from Three Orthogonal Planes(TOP).To reduce the dimensions of the learned features,whitening PCA has been used.They used a Support Vector Machine(SVM)to classify action.The presented techniques were assessed on Weizmann,royal institute(KTH),UCF Sports,and YouTube actions datasets,and the achieved accuracy on these datasets is 90%,87.33%,92.67%,and 81.40%,respectively.Results have proven that the presented principle component analysis(PCANet-TOP)model provides distinguishing and balancing features using TOP.It also enabled us to attain comparatively better results than the existing techniques.Ramya et al.[14] presented an algorithm based on distant transform and entropy features extracted from the human silhouettes.The first step was to attain the silhouettes,which were performed by using the correlation coefficientbased frame difference method.Then,the step was to extract features using Entropy and distance transform.This helped by facilitating the model with contour and deviation information.In the final step,the extracted features were given to neural networks to classify human actions.Datasets used to assess the presented model include Weizmann,KTH,and UCF50,and the achieved accuracy on them was 92.5%,91.4%,and 80%,respectively.Researchers also observed that there is still room for improvement,and results can be improved by manipulating the training testing ratio in the future.The local variation features and fused shape features resulted in the better performance of the algorithm.

Khan et al.[9]worked on a deep learning algorithm for HAR based on Kurtosis based weighted k-nearest neighbor (KNN).The architecture included four steps: feature extraction and mapping,kurtosis-based feature selection,serial-based feature fusion,and action identification.For feature extraction,two CNN models were used:DenseNet201 and Inception3.The classification was carried out on four different datasets: KTH,IXMAS,WVU,and Hollywood,with the obtained results being 99.3%,97.4%,99.8%,and 99.9%,respectively.It was discovered here that less features are included for the final classification aided in improving the algorithm’s performance.Khan et al.[9]presented a Gated Recurrent Neural Network that has amplified computational competency.For action classification,researchers have used sequential data.Gaussian mixture model (GMM) and Kalman’s filters were used to extract features.A novel approach based on hybrid deep learning methods was used for recognition.The GRUs aid in modeling the problem by the current sequential dependencies.Furthermore,graph regression neural network(GRNN)can be used to model problems with temporal relationships and time gaps between events.The method was tested using the KTH,UCF101,and UCF sports datasets.

Basak et al.[15] presented multiple ways to recognize action,including red,green,blue (RGB),depth,point cloud,infrared,etc.The choice of technique depends on the nature of the scenario and the application for which it is being developed.A survey of the performance of various HAR techniques is presented.The study surveyed Fusion techniques,including the Fusion of RGB,depth,and skeleton modalities.Among the existing fusion techniques,the fusion of A/V modalities produced the best results in predicting actions.Aside from the fusion,co-learning techniques were thoroughly investigated.It was a technique for transferring learning by extracting knowledge from auxiliary modalities and applying it to learning another modality.Visual modalities such as RGB and depth are included in these co-learning techniques.Fu et al.[16]presented an algorithm to detect sports actions using deep learning methods,specifically the algorithm of clustering extraction.Athletic movements were first detected from deep learning techniques and then fused with sports-centered movements.CNN was applied on the sample set where non-athletic and negative images were provided to the network.The set was gradually enhanced with gathered false positive predictions,and the obtained results were then optimized using a clustering algorithm.The idea was to acquire athletes’training posture by analyzing the movements of their specific sport.The application was designed to assist sports trainers in giving professional training to athletes effectively and efficiently.

Liang et al.[17] developed a hybrid of CNN and Short-Term Long Memory (LTSM).Extensive testing has been carried out to determine the efficacy of the hybrid method.The paper also included a comparison of various deep-learning techniques.The researchers named their technique CNN+LTSM.First,the results demonstrated that the efficiency of learning algorithms differed marginally,but this did not affect the overall result.Second,it claimed that spatial,temporal interest point (STIP) could perform even better in the given conditions because it could extract interest points in video frames containing various human actions.Yue et al.[18] performed survey research on multiple robust and operative architectures for HAR and future action predictions.The study compared state-of-the-art methods for the recognition and prediction of actions.Recent models,efficient algorithms,challenges,popular datasets,evaluation criteria,and future guidelines were also presented with documented proofs.After detailed study and analysis,it was concluded that better datasets provide a foundation for better prediction of actions.

3 Methodology

In this section,a detailed methodology for the proposed architecture has been presented.The complete architecture consists of various steps,including feature extraction via transfer learning,using two optimizers,i.e.,Artificial Bee Colony and Entropy-controlled feature selection,and serial-based feature fusion.The proposed HAR architecture is illustrated in Fig.1.

3.1 Datasets

In this work,five publicly accessible datasets have been utilized for the experimental approach.The datasets include IXMAS[19],KTH[20],UT Interaction[20],UCF Sports[20],and Weizmann[20].All these datasets have been well-known and used by several researchers in the last few years.The IXMAS and Weizmann have ten action classes,whereas the KTH and UT Interaction datasets have six action classes.UCF Sports action dataset contains 13 action classes.

Figure 1:Visual illustration of the proposed framework for action recognition

3.2 Convolutional Neural Network(CNN)

In recent times,CNN has become immensely popular for image classification problems.Various studies are conducted to analyze the efficiency of CNN in spatial patterns that allow for extracting valuable features [21].Recent trends in deep learning include spectral resolution,spatial grain,etc.CNN can apply to various problems in which classification,identification,and segmentation are at the top.The networks are useful for working on spatial patterns and enabling high spatial resolution data value.A variety of techniques for feature visualization by CNNs is helpful in the interpretation and allow learning from these models to improve its productivity.CNN is one of the novel techniques in machine learning that allows efficient and quick predictions for any given image.The network requires fewer parameters to learn than previously designed neural networks.A standard CNN has several layers,including the activation layer,i.e.,ReLU(Rectified Linear unit)layer,the Pooling layer(Max,Avg,Min),the fully connected(FC)layer,and some other hidden layers.There exist a variety of CNNs,including AlexNet,GoogleNet,Inception,ResNet,and DenseNet.The general structure of a CNN with multi-layer architecture is illustrated in Fig.2.The figure shows the complete design from input steam to final classification through the FC layer.Convolution layers are added to convolve the initial input and extract the required features.The extracted features are passed to multiple layers for further processing.After passing through different hidden layers,the network makes the final prediction.A simple architecture is illustrated in Fig.2.

Figure 2:Detailed structure of a multi-layered convolutional neural network

3.3 EfficientNet-B0

EfficientNet is one of the best CNNs of recent times[22].It is a family of prediction models from GoogleAI.It can scale up according to the number of parameters in the network.The model scales up with greater efficiency regarding the layer’s depth,width,and resolution of the input image/video frame.It can scale up to a mix of the parameters mentioned above.To balance the dimensions of width,depth,and resolution,compound scaling is performed.These dimensions are scaled up on a fixed ratio.The mathematical representation of compound scaling is given below:

The network also allows the creation of features instead of just feature extraction.These features can later be passed on to the classifier for predictions.The model outperformed all state-of-the-art networks of recent times,including ResNet,DenseNet,AlexNet,and others.In this research,the model is used on five different publically available datasets,and results are then compared on pre-defined criteria.Fig.3 defines the complete network structure of an EfficientNet model.

3.4 Transfer Learning

Figure 3:Detailed architecture of an EfficientNet-b0 deep learning model

3.5 Feature Selection

After feature extraction,the next step is to discard the features that do not contribute much to the performance.Next,the highest contribution feature is selected using two optimization algorithms,ABC and Entropy.In this section,the two algorithms are discussed in detail.Finally,from 1280 features extracted via EfficientNet-b0,the top 600 are selected in two separate feature vectors.

Figure 4:Illustration of transferring knowledge for action recognition

Artificial Bee Colony (ABC):Regarding the real-life bee colonies,ABC divides the bees into three groups:i)employed bees,ii)observer or onlooker bees,and iii)scout bees[25].The job of the employed bees is to look for the food resource and convey the message to onlooker bees.On the given information,the onlookers choose to start exploring the nearby space of the food resource and find a new food resource.Employed bees with an improved food resource with already decided iterations get the scout status,and the new task for the scout is searching for a new food resource.ABC is employed in four fundamental steps:

The first step is an initialization,where the algorithm is set to produce random food resources.Each of them is defined as a vector in the search space;xi=xi,1,xi,2,xi.3,...,xi,n

wherei={1,2,3,...,R}and R is the number four resource which is equal to the number of employed bees or onlookers.j={1,2,3,...,ρ}andρis the search space dimensions.xijis the jth dimension ofxi,R (0,1)is a random variable that uniformly distributes the search space.The minimum boundary value isand maximum boundary value is.

The second step is employed bees:Every employed bee is assigned a food resource,later modified by the bee itself after searching for a better resource.That is how knowledge is transferred from all the neighborhood except for the current locationxk.New food resource is located under Eq.(3);

wherexiis the current food source location,?ijis a homogeneously distributed value within the given range[-1,1].After the initial positionis found,the fitness value is assessed and equated with thexiwhich is the current position.Ifis better thanxi,is replaced byxiand this makes the algorithm enter its next iteration.The counter for the number of attempts for this iteration again resets to 0.Otherwisexienters the next iteration with the same food resource value.The value of the counter,in this case,is upgraded to 1.

The third step focuses on onlooker bees.Each of the employed bees passes on the gathered information about their respective food resources to onlooker bees.Depending on the fitness value of the food resource,each onlooker bee selects a position,and for the selection,roulette wheel scheme is followed by the onlookers.They advocate that the better the source’s fitness value,the higher the probability of selection.Probability is computed by Eq.(4).

wherefitiis the fitness value of food resourcexi,After equating the probability of each location,a random number and(0,1)is generated to govern the choice of food resource.Ifδi >rand(0,1),xiis selected as an employed bee in this step.

The last step caters to the scout bees;each food resource is initialized with 0.A counter contains the number of attempts.If the counter’s value increases from the fixed value,the previous food resource will be discarded,and then a new food resource is assigned that is generated by Eq.(2).

Each food resource is added to a feature subset when the features are selected using ABC.Fitness value determines the quality of the food resource in the feature subset.Each source is represented in a binary string.One represents the selection,whereas 0 indicates the source is not selected.

Entropy-Based Selection:Entropy is the measure of uncertainty of the random variableλ.It measures the different probabilities among a set of limited values.Letλbe a random variable with a limited set of values havingnvalues,such as {λ1,λ2,λ3,...,λn} andPis the set of a probability distribution.If a specified valueλ1occurs with probability distributionP(λi)such thatP(λi)≥0,i=1,2,3...,nand=1,then the information amount is related to the known occurrences ofλican be defined as:

This shows that the information generated in selecting a symbolλi is-log2P (λi)bits for a distinct source.On average,if the symbolλiis selectedn x P (λi)times innselections,the average information gathered fromnsource outputs is given below:

Mathematically,Entropy is the distribution function of a random variableλwhich depends on the probabilities.Hence,EntropyE(λ)is the mean value and can be determined by the following equation:

3.6 Feature Fusion

whereFusion(i)is the resultant of two feature vectors fused withM×J.The value ofJis modified in accordance with the variation in the training images.

4 Results and Discussion

This section focuses on the experiments performed and the analysis of the achieved results after extensive experimentation.In addition,performance measures and evaluation criteria are also discussed in the same section.A total of five datasets were chosen for use in this work;information on the datasets are given in Section 3.1.The results for each dataset are tabulated,and a complete analysis is provided along with the confusion matrix.50% of the total images in the dataset were used for training,with the remaining 50% used for model validation.K fold cross-validation,where K equals 10.The criteria for evaluation include the achieved accuracy and the computational time(S).The entire experiment is conducted on MATLAB2021b using a Personal Desktop Computer with 16 GB of RAM and an 8 GB graphics card.

4.1 KTH Dataset Results

Extensive experimentation is performed during the study on different standardized datasets.There are 6 six classes of this dataset.The entire dataset is split into 50:50 for training and testing.Table 1 presents the results of this dataset which obtained the highest accuracy by Cubic SVM (CSVM)of 98.4% and a computational time is 157.6 S.In the second step,ABC optimization is used,and selected the best features.For this experiment,the CSVM obtained the highest accuracy of 98.6%,and the recorded computational time was 83.412 S.Then,the entropy-controlled weighted KNN-based selection technique is employed for selecting the best features in descending order.This experiment obtained the best accuracy of 98.6%on CSVM,whereas the computational time was 73.534 S.In the last step,both selected features are fused via the SBE feature fusion technique.As a result,the CSVM obtained the best accuracy of 98.7%,which is improved to the previous experiments;however,the testing time is increased.

The accuracy of CSVM can be checked through a confusion matrix,illustrated in Fig.5.

Table 1:Achieved results on the KTH dataset.?Linear discriminant analysis(LDA)

4.2 Weizmann Dataset Results

Weizmann dataset results are presented in this section as numerical and confusion matrix.In the first experiment,features are extracted from the original EfficientNet model and performed classification.As a result,the CSVM obtained the best accuracy of 96.5%,whereas the noted computational time is 45.678 S.The ABC optimizer is applied in the second experiment,and the best features are selected.The best-selected features are classified using several classifiers and obtained the best accuracy of 96.4%.For this experiment,the computational time is reduced to 26.65 S,previously 45.678(S).In the third experiment,entropy-based features were selected and obtained the best accuracy of 96.7%,whereas the computational time was 23.758(S).In the last experiment,SbE-based fusion was performed and obtained the best accuracy of 96.8%,which is improved to the previous experiments (seen in Table 2).Overall,the CSVM outperformed this dataset.Also,the fusion process’s computational time is extended,but accuracy is also improved.In addition,the CSVM confusion matrix,which can be used to confirm the proposed accuracy,is shown in Fig.6.

Figure 5:Confusion matrix for feature fusion on cubic SVM classifier on KTH dataset

Table 2:Achieved results on Weizmann dataset

Figure 6:Confusion matrix for feature selection on cubic SVM classifier on Weizmann dataset

4.3 UCF Sports Dataset

The results of the UCF sports dataset have been described in this section.Table 3 presents the results of the UCF Sports dataset for all four experiments.In the first experiment,EfficientNet-based deep features are extracted and performed the classification.As a result,more than one classifier has been obtained the best accuracy of 100%,whereas the computational time of the LDA classifier is a minimum of 43.237 S.In the second step,ABC based optimization is performed,and selected the best features.The selected features are passed to the classifiers and obtain the best accuracy of 100%,whereas the time is reduced to 17.403 S.In the third experiment,Entropy-based best features were selected,and CSVM and FKNN obtained the best accuracy of 100%.In the last step,fusion is performed,and 100% accuracy is obtained,consistent with the other experiments but computationally slow.Moreover,Fig.7 shows the LDA classifier’s confusion matrix that can be utilized to verify the classification accuracy.

Table 3:Achieved results on UCF sports dataset

4.4 IXMAS Dataset

Results from the IXMAS dataset are displayed as a confusion matrix and as numerals in this section.In the first experiment,features are extracted from the original EfficientNet model and performed classification.As a result,the Fine KNN obtained the best accuracy of 96.7%,whereas the noted computational time is 189.79 S.The ABC optimizer is applied in the second experiment,and the best features are selected.The best-selected features are classified using several classifiers and obtained the best accuracy of 96.7%.As a result,this experiment’s computational time is reduced to 97.538 S,previously 189.79 S.In the third experiment,entropy-based features were selected and obtained the best accuracy of 97%,which improved,whereas the computational time was 88.911 S.In the last experiment,SbE-based fusion is performed and obtained the best accuracy of 96.9%(as seen in Table 4).This experiment consumed more time than the first three,but the accuracy was stable.In addition,the CSVM confusion matrix is shown in Fig.8,and it can be used to check the proposed accuracy.

Figure 7:Confusion matrix for feature selection on liner discriminant classifier on UCF sports dataset

Table 4:Achieved results on the IXMAS dataset

4.5 UT Interaction Dataset

This section contains the findings from the UT Interaction dataset.Table 5 presents the results of the UT Interaction dataset for all four experiments.In the first experiment,EfficientNet-based deep features are extracted and performed the classification.The best-obtained accuracy for this experiment is 99.7% on the Fine KNN classifier,whereas the computational time is 16.643 S.In the second experiment,Fine KNN obtained the best 96.7% accuracy and the computational time of 7.343 S.From this,it is noted that the computational time is reduced,but accuracy is also dropped.In the third experiment,CSVM obtained the best accuracy of 99.6%,whereas the computational time was 11.113 S.This experiment’s performance is better than the first two experiments.In the last experiment,fusion was performed and obtained the best accuracy of 99.7%with a computational time of 15.382 s.Overall,the CSVM performed well for this dataset.Fig.9 shows this dataset’s confusion matrix that can be utilized to verify the accuracy of Fine-KNN after the fusion process.

Table 5:Classification accuracy of UT interaction dataset

Figure 9:Confusion matrix of fine KNN classifier on UT interaction dataset

Finally,a thorough comparison is made with current methods,as shown in Table 6.In this table,several methods are listed;for each method,it is noted that they used several classifiers.Finally,we only use relevant data sets to compare the proposed accuracy.It can be seen from the accuracy values listed in this table that the proposed HAR framework has demonstrated increased accuracy.

Table 6:Comparison of the proposed method’s accuracy with the existing techniques

5 Conclusion

Action recognition has been gaining popularity in recent years due to its vast range of real-life applications.In this work,we proposed a deep learning and fusion of optimized features framework for the classification of accurate action recognition.The proposed framework consists of several serial steps.The pre-trained EfficientNet deep model was fine-tuned and trained on the selected action datasets using deep transfer learning in the first step.Then,features are extracted from the average pooling layer and computed the results.Based on the computed results,we analyzed several redundant features.Therefore,we performed two feature selection techniques and selected the best features.Then,the selected features are classified,and improved accuracies are obtained for all selected datasets.Also,the time was significantly reduced,which was this framework’s main strength.In the last,the fusion of selected features is performed to enhance the accuracy,but this step also increases the computational time,which is a drawback of this approach.In the future,we will consider this problem and propose a more optimized fusion approach.

Acknowledgement:Not applicable.

Funding Statement:The authors received no specific funding for this study.

Author Contributions:Software: M.N and S.K;Methodology: M.N,S.K,and M.U.F;Validation:M.A and M.N;Supervision: M.U.F and U.A;Writting and Review: U.T,M.N,and S.K;Project Administration: U.A and U.T;Conceptualization: M.A and U.T;Verification: U.A and M.U.F;Funding:M.N,S.K,U.A,and M.U.F.

Availability of Data and Materials:The datasets used in this work are publically available for the research purpose.

Conflicts of Interest:The authors declare that they have no conflicts of interest to report regarding the present study.