陸利蓬　柳陽威

摘 要：針對氣動噪聲計算問題，經過2年的研究，主要進展如下：（1）研究了高精度湍流模擬技術的數值方法。首先發展了一套基于高階有限差分格式的流場求解器，并進行了系統測評；在此基礎上，針對激波模擬精度，提出了帶寬耗散優化方法（BDOM），發展了MP-LD格式，結果表明MP-LD格式對小尺度流動結構的捕捉能力以及對湍流的模擬效率要顯著優于常規的高階激波捕捉格式。（2）采用高精度湍流模擬技術研究了復雜流動機理。利用MP-LD格式和ASTR程序，對激波/各向同性湍流干涉（SITI）和激波/湍流邊界層干涉（SBLI）等進行了DNS和機理性的研究。結果表明：湍流脈動之間的非線性作用使得大尺度湍流結構向各向同性恢復的過程更加復，而小尺度脈動結構則更容易恢復各向同性；由于來流速度脈動的影響，激波表面形狀會發生變形，較高的來流速度脈動會導致當?shù)丶げㄎ恢酶拷掠?，并增加激波的強度。?）研究了壓氣機三維角區分離流動機理和湍流模型改進。針對角區分離流動，首先開展了先進實驗測量和高精度數值模擬，為機理研究和湍流模型改進提供豐富的數據庫。其次，提出了基于湍流非平衡輸運特性改進湍流模型的新方法，并針對SA湍流模型，提出了兩種改進方法：一是修正模型系數Cb1；二是基于當?shù)芈菪扔嬋胪牧髂芰糠磦魑锢頇C制。其中，基于螺旋度改進可以“自適應”計入湍流非平衡輸運特性，可以“自適應”實現對不同工況下壓氣機三維角區分離流動的準確模擬。（4）研究了壓氣機轉靜干涉機理和時均模擬方法。針對轉靜干涉噪聲，團隊提出了時均模擬技術和線性諧波法相結合的快速非定常數值模擬思路。該課題首先采用非定常數值模擬技術，研究了轉靜干涉機理；其次改進了交界面處理方法，深入分析了確定性相關項的分布特點和對時均流場的影響特性，發展了確定性相關項模型，發展完善了時均模擬技術，為下一步和線性諧波法相結合，實現對轉靜干涉噪聲源的快速非定常計算，提供堅實的基礎。（5）建立了氣動聲學知識庫系統和噪聲機理知識。首先建立了國際上首套氣動聲學知識庫系統；其次對大攻角超音速流動，發現了機翼上表面存在一種激波/滑移面共存結構，發現了一種新的氣動噪聲來源；最后針對氣動聲學重要來源之一的點渦與物體的相互作用，建立了一套點渦群對多物體受力影響的基本理論。

關鍵詞：復雜流動機理 數值方法 氣動噪聲

Abstract：The mainly development of the research work in the first two years is divided into five parts. （1）A high-fidelity flow solver is developed and evaluated in the study. To improve numerical scheme for shocks， the bandwidth dissipation optimization method （BDOM） is developed. A high-order MP-LD scheme， based on BDOM is developed and assessed. The results show that MP-LD scheme is much better than the conventional high-order shock-capturing schemes in resolving small-scale flow structures and turbulent motions. （2）The DNS researches of shock/isotropic turbulence interaction and shock/turbulent boundary layer interaction are conducted. The return to isotropy of the turbulence downstream the normal shock is complex due to the nonlinear interaction between turbulence fluctuations. The shock surface is distorted by the inlet turbulence velocity fluctuations. Higher velocity fluctuations will make the local shock surface further downstream and increase the shock strength. （3）To investigate the corner separation in compressors， advanced experimental techniques and high-fidelity numerical simulations are conducted， and abundant database are achieved. A new modification approach for turbulence model is proposed based on turbulence transport nature. Two effective modified methods for SA model are achieved： one is to modify constant Cb1； the other is to take account of the energy backscatter by using relative helicity density. The result indicates that the modification based on helicity is self-adaptive for different conditions. （4）Investigation for rotor-stator interaction （RSI） noise prediction method is studied. Firstly， unsteady simulation is conducted to study RSI mechanism. Then the influence of rotor-stator interface treatment is improved. The distribution characteristics of deterministic correlations are analyzed and the influence of some factors on the time-averaged flow field is further studied. Based on above studies， an exponent decay deterministic correlation model is proposed. （5）Knowledge management system for aero-acoustics is set up and some acoustic flow mechanisms are studied. A new triple flow structure exists for a supersonic flow around a F15 fighter model at the high angle of attack. The Kelvin Helmholtz instability for the slip line would provide a new source of noise. The role of the body by including image vortex rings in the vortex ring model is studied and the body image effect reduces the lift force is found.

Key Words： Complex flow mechanisms； Numerical methods； Aero-acoustics

閱讀全文鏈接（需實名注冊）：http：//www.nstrs.cn/xiangxiBG.aspx？id=50996&flag=1