2015年3期
刊物介紹
The Chinese Journal of Chemical Engineering (Bimonthly, started in 1982) is the official journal of the Chemical Industry and Engineering Society of China and published by the Chemical Industry Press. The aim of the journal is to develop the international exchange of scientific and technical information in the field of chemical engineering. It publishes original research papers that cover the major advancements and achievements in chemical engineering in China as well as some articles from overseas contributors. The topics of journal include chemical engineering, chemical technology, biochemical engineering, energy and environmental engineering and other relevant fields. Papers are published on the basis of their relevance to theoretical research, practical application or potential uses in the industry as Research Papers, Research Notes, Chemical Engineering Data and Reviews. Prominent domestic and overseas chemical experts and scholars have been invited to form an International Advisory Board and the Editorial Committee. It enjoys recognition among Chinese academia and industry as a reliable source of information of what is going on in chemical engineering research, both domestic and abroad.
Chinese Journal of Chemical Engineering
- Micromixing characteristics in a gas-liquid-solid stirred tank with settling particles☆
- An experimental study of drag reduction by nanofluids in slug two-phase flow of air and water through horizontal pipes☆
- Effect of surfactant type on interfacial area and liquid mass transfer for CO2absorption in a bubble column☆
- Effects of bubbly flow on bending moment acting on the shaft of a gas sparged vessel stirred by a Rushton turbine☆
- Enhanced heat transfer in a heat exchanger square-duct with discrete V- finned tape inserts☆
- A novel purification process for dodecanedioic acid by molecular distillation
- Purification and separation of durene by static melt crystallization☆
- Sono-assisted preparation of magnetic ferroferric oxide/graphene oxide nanoparticles and application on dye removal☆
- Carbon nanotubes loaded with vanadium oxide for reduction NO with NH3at low temperature☆
- Kinetic studies on the dimerization of isobutene with Ni/Al2O3as a catalyst for reactive distillation process☆
- Prediction of Henry's constant in polymer solutions using PCOR equation of state coupled with an activity coefficient model
- Physicochemical properties of aqueous solutions of sodium glycinate in the non-precipitation regime from 298.15 to 343.15 K
- Pressure-volume-temperature and excess molar volume prediction of amorphous and crystallizable polymer blends by equation of state
- Thermodynamic behaviors of SiCl2in silicon deposition by gas phasezinc reduction of silicon tetrachloride☆
- Densities and viscosities of binary mixtures of n-decane+1-pentanol,+1-hexanol,+1-heptanol at temperatures from 293.15 to 363.15 K and atmospheric pressure☆
- Performance analysis of a zeotropic mixture(R290/CO2)for trans-critical power cycle☆
- Dechlorination of pentachlorophenol by grinding at low rotation speed in short time
- In-situ synthesized mesoporous TiO2-B/anatase microparticles:Improved anodes for lithium ion batteries☆
- Dissolution kinetics of aluminum and iron from coal mining waste by hydrochloric acid☆